Ampetronics

10 out of 10 On-Line | Audio Sales | Ampetronics

ILD122

ILD122

The AMPETRONIC ILD122 Induction Loop Driver is designed for a wide range of assistive listening applications where superior vocal and musical reproduction is paramount.

The ILD122 Induction Loop Drive is designed to cover loop areas up to 100 - 120 m². The unit is especially suitable for use in smaller churches, auditoriums and conference rooms.

The Loop Driver sets new standards for Constant-Current driving, utilizing the latest design technology to provide absolutely neutral, very high quality sound, with distortion levels well below those commonly associated with this type of equipment. The Loop Driver is designed to be used with simple, SINGLE TURN LOOPS, which ensures ease of installation, combined with very small cable size to reduce visual impact. 5 Year Warranty

Quantity:

ILD100

ILD100

The ILD100 is suitable for installations such as video conference rooms, private homes, TV rooms, nursing homes, receptions and waiting rooms and control room talk-back. It is designed to cover loop areas from very small loops up to square areas of 120 square metres, or rectangular areas of over 200 square metres.

Built in a compact steel case, it has two mono microphone inputs using 3.5mm jack sockets, each providing DC powering for electret capsules. A line input is provided using two RCA (phono) connectors, set to SCART signal level. Preset controls are provided for sensitivity of the two microphones and line inputs, drive current and tone. LEDS indicate compression, loop current and power. Vox switching may be configured to prioritise the first microphone input. It may be used free-standing or wall-mounted using holes provided on rear panel.

Frequency response: 80-6500Hz. AGC: Optimised for speech, dynamic range greater than 35dB. Output current: 4.8A sine wave, 1kHz; more than 7A peak. Power source: 230V AC 45-55Hz, 20W. Dimensions: 216 x 124 x 44 mm. Weight: 1.3kg

Included accessories: Handbook and installation instructions. Power cordset. Loop pad and fixing clips. 'Loop system present' sign. SCART-RCA (phono) cable. Tie-clip style electret microphone with 3 metre lead.

Optional accessories: See 'Ampetronic Adapters and Pre-amplifiers'.

Quantity:

ILD15BB

ILD15BB

The AMPETRONIC ILD15BB driver is designed specifically for use in lifts, vehicles and other sites where metal enclosures are present. The major problem in these locations is the loss caused by metal structure, which in most modern lifts is a fully metal cage.

The ILD15BB is designed to cope with the energy requirements of such a location, and offers the frequency dependent correction needed to ensure correct frequency response. A further capability, often needed in this situation, is integral battery backup, so that full operation can be maintained under emergency conditions.

The unit accepts signals from the normal lift sound system, and from any other sound system that carries general and evacuation information. The position of the loop cable in this application is very important, and AMPETRONIC should be consulted on the location and construction of the loop cable structure before installation. 5 Year Warranty

Quantity:

10 out of 10 On-Line > Audio Sales > Ampetronics