> 13 layer (18mm/0,7") birch plywood enclosure with textured scratch resistant paint finish with integrated handles and mechanical hardware for suspension

> 8 x 8” (2” VC) custom neodymium woofers granting high excursion and power handling

> 8 x 1” (1.7” VC) custom neodymium compression dvers coupled to a waveguide with 90°H dispersion horn

> 15°V coverage angle for MODUS 15a and 40°V for MODUS 40a

> 1400W rms Class D (PWM) high efficiency amplifier for the LF section

> 700W rms Class D (PWM) high efficiency amplifier for the HF section

> DSP Digital signal processor providing the following functions: cross-over, delay, energy control, dynamic low frequency equalization, frequency domain equalization

> On-board presets allow different equalization configurations

> Digital delay line set up to 63.75m (209.15ft) in steps of 25cm (9.84”)

> 24bit 192KHz very low noise A/D & D/A converters

> Control panel with: XLR input and link, sensitivity, 2 x banks of dipswitch to control delay and choice of presets, 1 x dipswitch to allow high-pass filter insert when used with subwoofer, ground-Lift, limiter and protection LEDs

> Mechanical hardware for suspension with 10:1 safety factor

> Full line of accessories for suspension, ground stacking or over MODUS SUBa facilities 


Price:  £3,960.04 Including VAT (Ex-VAT: £3,370.25)

> 13 layer (18mm/0,7") birch plywood enclosure with textured scratch resistant paint finish with integrated handles and mechanical hardware for suspension

> 8 x 8” (2” VC) custom neodymium woofers granting high excursion and power handling

> 8 x 1” (1.7” VC) custom neodymium compression dvers coupled to a waveguide with 90°H dispersion horn

> 15°V coverage angle for MODUS 15a and 40°V for MODUS 40a

> 1400W rms Class D (PWM) high efficiency amplifier for the LF section

> 700W rms Class D (PWM) high efficiency amplifier for the HF section

> DSP Digital signal processor providing the following functions: cross-over, delay, energy control, dynamic low frequency equalization, frequency domain equalization

> On-board presets allow different equalization configurations

> Digital delay line set up to 63.75m (209.15ft) in steps of 25cm (9.84”)

> 24bit 192KHz very low noise A/D & D/A converters

> Control panel with: XLR input and link, sensitivity, 2 x banks of dipswitch to control delay and choice of presets, 1 x dipswitch to allow high-pass filter insert when used with subwoofer, ground-Lift, limiter and protection LEDs

> Mechanical hardware for suspension with 10:1 safety factor

> Full line of accessories for suspension, ground stacking or over MODUS SUBa facilities

> Performances comparable to high-end touring linearray at an extremely competitive price 


Price:  £3,960.04 Including VAT (Ex-VAT: £3,370.25)

> 13-layer birch plywood extra textures scratch resistant enclosure (18mm / 0.7”) with integrated handles and mechanical hardware for suspension.

> 2 x 15” (4” VC) B&C® custom neodymium woofers in push-pull configuration offering extra-high performance

> 1400W rms Class D (PWM) high efficiency amplifier

> DSP Digital signal processor providing the following functions: cross-over, delay, energy control, dynamic low frequency equalization, frequency domain equalization

> On-board presets allow different equalization configurations and variable volume control in 3dB steps for better sound alignment with the satellites

> Digital delay line set up to 63.75m (209.15ft) in steps of 25cm (9.84”)

> 24bit 192KHz very low noise A/D & D/A converters

> Control panel with: XLR input and link, sensitivity, 2 x dipswitch sets to control delay and choice of presets, 1 x dipswitch to allow phase inversion, ground-Lift, limiter and protection LEDs 


Price:  £2,673.13 Including VAT (Ex-VAT: £2,275.00)