10 out of 10 Productions Limited Qube Controllers

Last Updated:

Advanced

11th Year On-line - 6,000 products on-line (250,000 available - can't find it? Just ask!) Chat to us Live on-line with MSN : live1010@hotmail.co.uk

10 out of 10 On-Line > Sound Equipment Sales > Qube > Qube Controllers

		QRC 32 - Network Interface All the Qube active series loudspeakers are equipped with a network interface (In-Trough) with RJ45 connectors, capable of driving cable lengths of up 100 mt. The QRC 32 USB interface features two channels marked A and B, each of which is possible to connect 16 speakers for a total of 32 . The QRC 32 , thanks to the intelligent HDD processor, built in the powered speakers, allows to control the following speaker parameters: - speakers operating status - built in amplifier operating status - heat sink temperature - output signal level - input signal overload - volume On/Off - 4 parametric equlisers - delay - 8 equalisation presets (default) - input gain The software is also equipped with accessory functions that make it possible to create and save groups, perform sequential power up, “solo function to identify individual speakers, and eq. bypass.
		Quantity:

		SP 26 D - Digital controller The SP 26 features 2 inputs and 6 outputs, each output feature crossover filters, 5 band parametric equaliser configurable as high and low shelving filters plus limiter and delay. Full metering is provided for inputs and outputs, with mute and access buttons allowing quick set up and gain adjustment. Features - 2 Inputs and 6 outputs provide for multiple crossover formats including full stereo 3 way. - 6 x 5 band parametric sections, plus high and low shelving filters for box equalisation. - High performance limiters on each output. - Precise 2.6 mS (less than 1mm) delay increment for perfect driver time alignment. - 80 non-volatile preset memories. - 19 User memories - Full and individual parameter locking. - Delay linking option allows speaker box alignment while keeping driver alignment. - Mono sub mix is provided. - Excellent sound quality - RS232 interfaces, provided as standard, allow connection to PC enabling quick and easy updates of software and presets. - Accommodates mains voltages from 70V to 260V without adjustment. - AES/EBU option is available. - Preset Manager Software allows easy preset definition.
		Quantity:

		HCR - Hosting Controller Rack HCR 12-22 is a 2-rack unit system designed to accommodate and power two SP 22D or SP 22Ds processors, equipped with all the necessary connectors for correct interfacing of processors and amplifiers. The rear panel of the HCR 12-22 processor is equipped with 12 connectors (6 for amplifier “1” and 6 for amplifier “2”); 2 XLR-M sockets (CH1 / CH2) carry the outputs for the unbalanced and processed signal outputs, to be connected to the amplifier inputs. 2 “Sensing” Speakons to which the amplifier power outputs are to be connected; 2 "Link" Speakons for connection of the loudspeakers.
		Quantity:

		SP 22 D - The digital controller SP22 is a 2-in/2-out digital signal processor (DSP) designed to optimise the performance of all loudspeakers in the QUBE range. Model SP 22 are easily installed in the rear panel of a QUBE amplifier, or it can be rack-mounted when using other power amplifiers (in this case the HCR 12/22 adapter is used to install two SP22 modules). The SP 22 digital control unit have been projected to control speaker (SP 22D) and woofer(SP 22Ds) cabinets. Model SP 22D is designed for use with 2-way full-range speakers (Q106, Q208, Q110, Q112, Q115, QM115); model SP 22Ds is designed for use with subwoofers (QS112, QS115, QS118, QS218). The main characteristics are as follows: - Frequency range equalisation to optimise frequency response and power response. - High precision control of power delivered to loudspeakers by means of an amplifier output sensing function. - Woofer excursion control - High pass filter - Fast rolloff crossovers (steep slope) - Delays on both channels to compensate for vertical misalignment - General delay on both channels from 0.25 m to 64 m. - 4 configuration modes: stereo/biamp/bridge/parallel - 2 XLR inputs - 2 parallel XLR outputs - 8 dipswitches to change the delay on both channels - 4-position selector for 4 configuration modes: stereo/biamp/bridge/parallel - 1 dipswitch (1) for SUB/PHASE selection: SUB mode activates the high pass filter when SP 22 is utilised to control a satellite; for the model SP 22Ds PHASE mode inverts the phase.
		Quantity:

Information is subject to change without notice. The rights and ownership of all trademarks & devices are the property of their respective owners Copyright © 1997-2008. 10-day money back guarantee (For Consumers)