1. Home
  2. Login
  3. Recent Orders
  4. View Basket
  5. Checkout

1989-2019, 30th year. Registered in England/Wales No. 02455157

TECPRO WIRED

TECPRO BP111 (Single Channel)

TECPRO BP111 (Single Channel)


10outof10 have managed to convince Tecpro to bring back into production the Tecpro BP111 single channel beltpack in the traditional metal enclosure. We're very pleased about this!!

The BP111 is a tough, light-weight beltpack suitable for use on the belt, free standing or on a wall. It has been designed to withstand portable use where care is not always taken by the user.



Price: 225.00+VAT (270.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO BP511 (Single Channel)

TECPRO BP511 (Single Channel)


The BP511 single circuit beltpack has 'Mic Select' switches linked in parallel. Pressing either switch will open or close the microphone circuit. The 'Mic Select' switches glow green when activated. A single volume control is provided for monitoring via a pluggable headset. The BP531 is as the BP511 but includes vibration alert.

To catch the attention of operators who have removed their beltpack and headset, a call alert signal is sent by pressing the red 'Call' button. This produces a combination of 20kHz tone and a DC signal to trigger the call lights on all user stations and outstations on a chosen circuit. DC call signalling has been retained for compatibility with previous Tecpro designs.


Price: 175.00+VAT (210.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO BP167 (Single Channel)

TECPRO BP167 (Single Channel)


Designed for the offshore industry, the IP67 rated Tecpro BP167 beltpack has been designed to withstand harsh, wet weather conditions and to be operated with ease while wearing heavy gloves.

Back on dry land, the BP167 is also suitable for outdoor events where operators will be working in the rain.

The BP167 shares the same electronics as our popular Series 2 beltpacks. The electronics are housed within a robust aluminium case with sealed top and bottom plates.

The top plate is fitted with a rotary volume control for the headset and a 'Mic' On/Off button with latching and PTT operating modes. A red LED in the centre of the button illuminates when the mic is switched on. A momentary low level confidence tone indicates that the mic has been switched on or off.


Price: 345.00+VAT (414.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO 2 BP531 (Single Channel) with vibration alert

TECPRO 2 BP531 (Single Channel) with vibration alert


As the BP511, the BP531 also has a vibrator motor fitted but is otherwise identical. A vibration mode, similar to that used in mobile phones, is triggered when a call alert signal is received. The function can be disabled by pressing a combination of buttons on the beltpack.


Price: 210.00+VAT (252.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO 2 BP523 (Dual Channel)

TECPRO 2 BP523 (Dual Channel)


3 pin XLR version Dual Channel


Price: 255.00+VAT (306.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO 2 BP543  (Dual Channel - (monaural)

TECPRO 2 BP543 (Dual Channel - (monaural)


BP543 Dual circuit beltpack with vibration alert (monaural) (XLR-3 connectors)


Price: 290.00+VAT (348.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO 2 BP525 (Dual Channel)

TECPRO 2 BP525 (Dual Channel)


5 pin XLR version Dual Channel


Price: 260.00+VAT (312.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO SMH210 Single muff headset

TECPRO SMH210 Single muff headset




Price: 110.00+VAT (132.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO DMH220 Dual muff headset

TECPRO DMH220 Dual muff headset


Heavy duty dual muff headset combination, robust moulded enclosed flexible mic boom. Earpiece impedance 2x400 ohms, (sensitivity 95dB for 0.548V input), frequency response 50-14400Hz. Dynamic mic 200 ohms, sensitivity 0.1mV at 5cm distance and/or 1.7mV/PA (1kHz/1m), frequency response 90-10000Hz, off-axis sensitivity 10dB at 180°. 1.5m steel cable.

Available with 4 pin or 5 pin XLR connectors.


Price: 120.00+VAT (144.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO SMH310 Single muff headset

TECPRO SMH310 Single muff headset




Price: 185.00+VAT (222.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO DMH320 Dual muff headset

TECPRO DMH320 Dual muff headset


ew generation high performance headsets specifically designed for communications use

– Retains the renowned durability and comfort of the 200 series

– Very robust construction, made from unbreakable flexible composite material

– Similar construction to 200 series, spare parts also available

– Dual-chamber foam-filled earshells, larger than 200 series for wearing comfort

– High acoustic isolation on DMH320 for reduced ear fatigue

– Extended response ear loudspeakers

– Broadcast quality noise-cancelling dynamic microphone


Price: 215.00+VAT (258.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO AD903 2 to 4 wire adapter

TECPRO AD903 2 to 4 wire adapter


The AD903 2 to 4 wire adapter allows connection of almost any audio source to a Tecpro ring intercom 2 wire system. For example, most broadcast video cameras have in-built 4 wire comms systems which are cabled within the main video cable. Use of an AD903 at the camera control unit will allow that camera to appear as a part of the Tecpro communication system, while minimising extra wiring and expense.


Price: 195.00+VAT (234.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO HS581 Headset Station

TECPRO HS581 Headset Station


Offering similar facilities to a beltpack, the Tecpro HS581 is a single channel Headset Station suitable for flush mounting to walls, table tops or control consoles. Cables are terminated to a fixed screw-termination block mounted on the PCB.

Flush Mounting

Single intercom circuit

Fixed screw terminal block for easy installation

Side tone preset mounted on PCB

Powerful headphone amplifier

Brushed aluminium front panel, black


Price: 203.20+VAT (243.84 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO HS591 Telephone style handset with cradle

TECPRO HS591 Telephone style handset with cradle


The Tecpro HS591 handset is designed for use with a wired Tecpro intercom system in situations where a standard beltpack and headset would be inconvenient, in a theatre foyer, ticket office or corridor for example. It has most of the functionality of a beltpack and is suitable for siting on a desk or counter or may be wall-mounted with two screws. The electronics are housed in the telephone cradle base and it takes its power from the Tecpro line.

It is designed to be used on a circuit powered with either a Tecpro power supply or a Tecpro Master Station in conjunction with other Tecpro outstations or beltpacks. The HS591 is compatible with previous generation Tecpro designs. Connection to the intercom circuit is made with the supplied cable. This has an RJ11 connector to connect to the HS591 and bare ends ready for termination with an appropriate connector or to a junction box.


Price: 295.00+VAT (354.00 Including VAT at 20%)



Add to order and Save 15% off marked price

54-382 PELTOR MT7H79A HEADSET Ear defending, with 4 pin female XLR

54-382 PELTOR MT7H79A HEADSET Ear defending, with 4 pin female XLR


Peltor has a long-established reputation for a wide range of ear-defending products, including some models aimed specifically at the broadcast user.

The H79 headphones have been in use in high ambient noise environments for many years and have an established reputation for effectiveness and comfort during extended use. They comprise two high-attenuation earcups with soft foam- and fluid-filled sealing rings with built-in pressure-evening channels for effective sealing. This model uses the type A headband, which is padded stainless-steel spring design. The MT7 noise-cancelling microphone is fitted on an easily adjustable boom, which may be unplugged from the cup for easy replacement.


Price: 203.20+VAT (243.84 Including VAT at 20%)


TECPRO DT108 Single muff headset (4-pin XLR) 54-537

TECPRO DT108 Single muff headset (4-pin XLR) 54-537


BEYERDYNAMIC DT 108,28 HEADSET Single ear, 400 ohms, with 200 ohms mic.

Terminated with female 4-pin XLR for Clearcom, ASL & Tecpro beltpack use.


Price: 181.30+VAT (217.56 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO DT109 Dual muff headset (4-pin XLR) 54-538

TECPRO DT109 Dual muff headset (4-pin XLR) 54-538


BEYERDYNAMIC DT 109,28 HEADSET 400 ohms, with 200 ohms mic.

Terminated with female 4-pin XLR for Clearcom, ASL & Tecpro beltpack use.


Price: 227.70+VAT (273.24 Including VAT at 20%)



Add to order and Save 15% off marked price

BEYERDYNAMIC DT 280 HEADSET Single ear

BEYERDYNAMIC DT 280 HEADSET Single ear


54-512 BEYERDYNAMIC DT 280 HEADSET Single ear, 80 ohms, with 200 ohms mic



Price: 240.90+VAT (289.08 Including VAT at 20%)


BEYERDYNAMIC DT 290-XJ MK II  54-518

BEYERDYNAMIC DT 290-XJ MK II 54-518


BEYERDYNAMIC DT 290-XJ MK II HEADSET 80 ohms, with 200 ohms mic, XLR3M, 6.35mm jack



Price: 273.69+VAT (328.43 Including VAT at 20%)


TECPRO PS751 Power supply, single circuit -

TECPRO PS751 Power supply, single circuit -


Tecpro Series 2 Power Supplies provide 24V DC to power small to medium sized intercom systems while terminating the audio lines with the correct impedance, enabling full duplex (simultaneous, two way) conversations to take place over extended cable runs. The 2A supply is capable of driving up to sixty BP111 beltpacks or up to fourteen Tecpro loudspeaker outstations and is protected by a compact, robust, extruded aluminium case designed to withstand the rigours of the live events environment. They are fully compatible with older Tecpro designs.

Series 2 power supplies are protected against short circuit and over-temperature. Protection is electronic and automatic and no resetting is necessary following removal of a fault condition. This new generation of PSU can be operated world-wide without the need to change power supply settings.

IEC mains lead NOT supplied


Price: 225.00+VAT (270.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO PB752 Power booster, dual circuit

TECPRO PB752 Power booster, dual circuit


Free-standing, single & multi circuit power supplies

Tecpro Series 2 Power Supplies provide 24V DC to power small to medium sized intercom systems while terminating the audio lines with the correct impedance, enabling full duplex (simultaneous, two way) conversations to take place over extended cable runs. The 2A supply is capable of driving up to sixty BP111 beltpacks or up to fourteen Tecpro loudspeaker outstations and is protected by a compact, robust, extruded aluminium case designed to withstand the rigours of the live events environment. They are fully compatible with older Tecpro designs.

Series 2 power supplies are protected against short circuit and over-temperature. Protection is electronic and automatic and no resetting is necessary following removal of a fault condition. This new generation of PSU can be operated world-wide without the need to change power supply settings.

IEC mains lead NOT supplied


Price: 245.00+VAT (294.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO PS753 Power supply, triple circuit

TECPRO PS753 Power supply, triple circuit


Tecpro Series 2 Power Supplies provide 24V DC to power small to medium sized intercom systems while terminating the audio lines with the correct impedance, enabling full duplex (simultaneous, two way) conversations to take place over extended cable runs. The 2A supply is capable of driving up to sixty BP111 beltpacks or up to fourteen Tecpro loudspeaker outstations and is protected by a compact, robust, extruded aluminium case designed to withstand the rigours of the live events environment. They are fully compatible with older Tecpro designs.

Series 2 power supplies are protected against short circuit and over-temperature. Protection is electronic and automatic and no resetting is necessary following removal of a fault condition. This new generation of PSU can be operated world-wide without the need to change power supply settings.

IEC mains lead NOT supplied


Price: 260.00+VAT (312.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO PS754 Rackmount power supply/booster, dual circuit

TECPRO PS754 Rackmount power supply/booster, dual circuit


PS754 Rackmount power supply/booster, dual circuit


Price: 445.00+VAT (534.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO MS741 Series 2 Master Station

TECPRO MS741 Series 2 Master Station


On its own, the MS741 Master Station offers two independent, full duplex intercom circuits. The ME742 Extender unit increases this capability up to four circuits. That’s good news for many venues where the limitations of working with just two intercom circuits is an on-going cause of frustration, but up to this point, a simple and economical solution has not been available.

New features include a greatly improved power supply capable of supplying almost twice the drive current of the previous system. Up to 30 TECPRO BP111 beltpacks can now be powered by each circuit, and at the flick of a switch, circuits may be linked to provide a single “Super Circuit” with double the power - ideal for driving signals down long cables!

Latching or non-latching options are now available for switching Microphones on and off. A light tap on the ‘Talk’ button latches the microphone in the ON position until the button is tapped again. Holding the ‘Talk’ button down selects unlatched mode and the microphone switches OFF when the button is released.

IEC mains lead NOT supplied


Price: 860.00+VAT (1,032.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO ME742 Series 2 Master Station Extender

TECPRO ME742 Series 2 Master Station Extender


ME742 Master Station Extender

IEC mains lead NOT supplied


Price: 750.00+VAT (900.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO MS745 Master station

TECPRO MS745 Master station


TECPRO MS745 Master station

IEC mains lead NOT supplied


Price: 695.00+VAT (834.00 Including VAT at 20%)



Add to order and Save 15% off marked price

Tecpro AD913 Walkie-Talkie Interface

Tecpro AD913 Walkie-Talkie Interface


AD913 Simplex Radio Adapter

– Allows combined wired/radio systems to be assembled

– Interfaces with most good simplex radio transmitters

– Audio connections transformer balanced to reduce hum and interference

– Presets multi-turn types for easy adjustment

– Robust extruded case - virtually indestructible

– Industry standard XLR type connectors

The AD913 allows communication between a Tecpro wired system and a simplex radio system, typically a pair or more of Walkie-talkies. It allows audio on the wired comms system to be transmitted to remote radios, and replies from these remote units to be heard by parties on the wired system circuit.

The unit provides a mic level output for connection to a transmitter and has a phone level input to accept a receiver. In addition it has arrangements to provide a push-to-talk (P.T.T.) or ‘transmit on’ switching, operated by the ‘signal ‘ lamp of outstations on the wired circuit to which the AD913 is connected. Any outstation can activate a radio transmission by depressing the ‘signal’ lamp switch. The system signal lamps on other outstations will light in the normal way, and the speech on the wired circuit will be sent to the transmitter and the necessary ‘transmit’ will be activated. All stations will hear incoming calls when the ‘signal’ is off.

Technical Specification

Power requirements: 24-30 DC, 15-25mA from comms system

External input: To suit earphone/speaker levels, 10k ohms nom. balanced and floating

External output: To suit mic inputs, 200 ohm nominal source balanced and floating, open circuit in receive mode

External PTT: Single pole contact, closed circuit in transmit, rated 0.25A at 28V DC

Connections: Transceiver via XLR 6 pin male (Neutrik). Intercom ring (2-wire) via XLR 3 pole male and female (loop-through)

Optional accessories: AL919 is a readymade cable to interface the AD913 to the TTI FreeQuency TX-1446 and Maxon SL55 series handportables. AL920 interfaces to the Multicom Junior 446MHz series.


Price: 265.00+VAT (318.00 Including VAT at 20%)



Add to order and Save 15% off marked price

Tecpro AL919 Adapter cable AD913 to TTI TX-1446 and Maxon SL55

Tecpro AL919 Adapter cable AD913 to TTI TX-1446 and Maxon SL55


AL919 is a readymade cable to interface the AD913 to the TTI FreeQuency TX-1446 and Maxon SL55 series handportables. AL920 interfaces to the Multicom Junior 446MHz series.


Price: 45.00+VAT (54.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO AL920 Adapter cable AD913 to MultiCom Jnr

TECPRO AL920 Adapter cable AD913 to MultiCom Jnr


TECPRO AL920 Adapter cable AD913 to MultiCom Jnr



Price: 28.00+VAT (33.60 Including VAT at 20%)



Add to order and Save 15% off marked price

Tecpro LS351 Talkback Loudspeaker Stations

Tecpro LS351 Talkback Loudspeaker Stations


The LS351 Loudspeaker Station is designed to provide local monitoring of a single intercom circuit without the need to wear headphones. The built-in microphone allows full duplex (simultaneous talk and listen) conversations to take place. Feedback cancellation circuitry helps avoid acoustic howl-round when speaker and microphone are operating together. To further reduce feedback, a gooseneck microphone (which allows the operator to speak closer to the mic capsule) may be plugged in, disabling the internal microphone. If required, a headset may be plugged in, disabling both the internal microphone and speaker.


Price: 395.00+VAT (474.00 Including VAT at 20%)



Add to order and Save 15% off marked price

Tecpro LS352 Talkback Loudspeaker Stations

Tecpro LS352 Talkback Loudspeaker Stations


The new Tecpro LS352 is a dual circuit, desktop Loudspeaker Station featuring a carefully selected 80mm loudspeaker and a high quality, flush mounted electret microphone. Construction is based around a rigid aluminium extrusion with ABS side panels. The microphone, loudspeaker and associated controls are mounted on a machined top plate.


Price: 425.00+VAT (510.00 Including VAT at 20%)



Add to order and Save 15% off marked price

Tecpro LS361 Talkback Loudspeaker Stations

Tecpro LS361 Talkback Loudspeaker Stations


The new Tecpro LS361 is a single circuit, wall mounting Loudspeaker Station featuring a carefully selected 80mm loudspeaker, and a flush mounted electret microphone. Construction is based around a rigid aluminium extrusion with a profile suitable for surface mounting the station to a wall. Screw slots are provided in the rear for convenience. The microphone, loudspeaker and associated controls are mounted on a machined top plate.


Price: 385.00+VAT (462.00 Including VAT at 20%)



Add to order and Save 15% off marked price

Tecpro LS381 Talkback Loudspeaker Stations

Tecpro LS381 Talkback Loudspeaker Stations


The new Tecpro LS381 is a single circuit, 1U rackmount Loudspeaker Station featuring a carefully selected compact 70mm x 40mm loudspeaker and a flush mounted electret microphone. The microphone, loudspeaker and associated controls are mounted on the 19" front panel.


Price: 445.00+VAT (534.00 Including VAT at 20%)



Add to order and Save 15% off marked price

Tecpro LS382 Talkback Loudspeaker Stations

Tecpro LS382 Talkback Loudspeaker Stations


The LS382 rackmount Loudspeaker Station is designed to provide local monitoring of two independent intercom circuits without the need to wear headphones. The built-in microphone allows full duplex (simultaneous talk and listen) conversations to take place. Feedback cancellation circuitry helps avoid acoustic howl-round when speaker and microphone are operating together. To further reduce feedback, a gooseneck microphone (which allows the operator to speak closer to the mic capsule) may be plugged in, disabling the internal microphone. If required, a headset may be plugged in, disabling both the internal microphone and speaker.


Price: 485.00+VAT (582.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO SL909 Xenon strobe lamp

TECPRO SL909 Xenon strobe lamp


The Xenon Strobe Lamp unit can be connected at any point in a ring and when a call signal is sensed, will produce high power flashes at approximately one per second from a xenon beacon. The current consumption of 60mA is approximately equivalent to one BP511 beltpack


Price: 140.00+VAT (168.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO LSM1 Gooseneck Mic

TECPRO LSM1 Gooseneck Mic




Price: 105.00+VAT (126.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO LSM1B Gooseneck Mic (Black)

TECPRO LSM1B Gooseneck Mic (Black)


In Black


Price: 105.00+VAT (126.00 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO HH5 Fist Mic for LS300

TECPRO HH5 Fist Mic for LS300


The HH5 handset is a 'fist' type microphone for use in noisy environments.



Price: 42.00+VAT (50.40 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO Single circuit cable - 3 metres 27-923

TECPRO Single circuit cable - 3 metres 27-923


27-923 TECPRO Single circuit cable - 3 metres


Price: 23.00+VAT (27.60 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO Single circuit cable - 5 metres 27-925

TECPRO Single circuit cable - 5 metres 27-925


27-925 TECPRO Single circuit cable - 5 metres


Price: 27.00+VAT (32.40 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO Single circuit cable - 10 metres 27-930

TECPRO Single circuit cable - 10 metres 27-930




Price: 36.00+VAT (43.20 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO Dual circuit cable - 3 metres

TECPRO Dual circuit cable - 3 metres


27-943 - Dual circuit cable - 3 metres (XLR 6 pin)



Price: 36.00+VAT (43.20 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO Dual circuit cable - 5 metres

TECPRO Dual circuit cable - 5 metres


27-945 Dual circuit cable - 5 metres (XLR 6 pin)



Price: 38.00+VAT (45.60 Including VAT at 20%)



Add to order and Save 15% off marked price

TECPRO Dual circuit cable - 10 metres

TECPRO Dual circuit cable - 10 metres


27-950 Dual circuit cable - 10 metres (XLR 6 pin)



Price: 43.00+VAT (51.60 Including VAT at 20%)



Add to order and Save 15% off marked price

Recently Viewed